ZSM 580 Pressure Sensitive Vinyl Flooring Adhesive (PSA)

ZY 380
Pressure Sensitive Vinyl Flooring Adhesive (PSA)
1. Product Description
• Water-based
• Solvent-free
• Pressure sensitive
• Long open time
• Residential & commercial
2. Recommended Applications
• LVT, PVC tiles and vinyl planks
• Vinyl sheet flooring
• Semi-flexible vinyl tiles
• Rubber flooring with smooth backing (light interior traffic)
• Carpets / needlepunch
3.Technical Data (Typical Values)

PRODUCT IDENTITY
Consistency:	creamy paste
Colour:	light beige
Density (g/cm³):	1.11
pH:	8
Dry solids content (%):	58
Brookfield viscosity (mPa·s):	7000
VOC emission	Very low
APPLICATION DATA (at +23°C - 50% R.H.)
Application temperature range:	from +5°C to +40°C
Waiting time:	approx. 10-20 minutes
Open time:	60 minutes
Set to light foot traffic:	1-5 hours
Ready for use:	approx. 48-72 hours
FINAL PERFORMANCE DATA
Resistance to moisture:	good
Resistance to aging	excellent
Resistance to solvents and oils:	fair
Resistance to temperature:	excellent
Resistance to wheeled chair stress:	very good
Underfloor heating systems:	suitable
Peel bonding strength (90°) • Homogeneous PVC: • Vinyl Flooring(PVC base):	>  1.5

4. Consumption

Typical consumption depending on substrate condition, flooring backing and trowel type:
• A1 notched trowel: 0.15 – 0.25 kg/m²
• A2 notched trowel: 0.20 – 0.30 kg/m²
5. Packaging & Storage
• 20KG
•   Available in multiple packaging sizes upon request
• OEM / private label available
• 12 months shelf life
• Store in a cool, dry place
• Protect from frost and direct sunlight
6. Safety
• Non-flammable
• Not classified as hazardous
• Refer to MSDS
7. Manufacturer Information
• Brand: OCTOHOLD
• Manufacturer: Bozhou Greenvinyl New Materials Co.,Ltd.
• Product for professional use

8. Disclaimer

The technical information and recommendations contained in this document are based on laboratory tests and practical experience.
Actual performance may vary depending on substrate conditions, installation methods and environmental factors.
The user is responsible for verifying the suitability of the product for the intended application.

9. Customs Information
• HS Code: 3506.91.90